HIP2100IR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 16 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 14V |
| Power Dissipation-Max | 3.3W |
| Nominal Supply Current | 2.5mA |
| Current - Output | 2A |
| Turn On Delay Time | 8 ns |
| Voltage - Output | 400mV |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 8 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 0.045 µs |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
HIP2100IR Overview
There is greater flexibility with the VQFN package.This configuration includes 2 drivers.Mosfet driver is based on 16 terminations.Mosfet driver is mounted using Surface Mount.The pins are configured with 16 when designing the chip.In order to operate, a voltage of 12V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.There are several useful electronic components found in its subcategory of MOSFET Drivers.On the board, there are 16 component pins.There is a maximum operating temperature of 125°C.Mosfet gate drivers is permissible to operate at a temperature of -40°C.The supply voltage of 14V is its maximum value for operation.Mosfet gate drivers is outputting a current of 2A.A voltage of 400mV is used as the output voltage.
HIP2100IR Features
2 drivers
16 pins
HIP2100IR Applications
There are a lot of Intersil (Renesas Electronics America) HIP2100IR gate drivers applications.
- Refrigerator
- Motor controllers
- High current laser/LED systems
- Pulse transformer drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Power Supplies
- High-voltage isolated DC-DC converters
- 3-Phase Motor Inverter Driver
- High frequency line drivers
- Motor Control
