HIP2100IR4Z
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 12 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 14V |
| Min Supply Voltage | 9V |
| Power Dissipation-Max | 3.3W |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 2.5mA |
| Current - Output | 2A |
| Turn On Delay Time | 8 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 0.045 µs |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HIP2100IR4Z Overview
Gate drivers provides greater flexibilGate driversy to use the DFN package.Initially, the configuration is composed of 12 terminations.The mount method is Surface Mount.A total of 12 pins are available on the device.With a supply voltage of 12V, it is designed to operate.As its interface IC, HALF BRIDGE BASED MOSFET DRIVER is being employed.2A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.The basis of this system consists of 2 outputs.There is a maximum value of 125°C for the allowable operating temperature.-40°C is the minimum operating temperature.To increase stability, keep the supply current at 2.5mA.For operation, it requires a voltage of 14V.This device is designed to operate with a voltage of 9V.Mosfet gate drivers outputs a current of 2A at the moment.
HIP2100IR4Z Features
12 pins
HIP2100IR4Z Applications
There are a lot of Intersil (Renesas Electronics America) HIP2100IR4Z gate drivers applications.
- Isolated Supplies for Motor Control
- DC/DC converters
- Dual-Battery Systems
- Topologies
- Commercial air-conditioning (CAC)
- Welding
- Digitally controlled power supplies
- Motor controllers
- PCMCIA applications
- Telecom switch mode power supplies
