HIP2100IRZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 16 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -55°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 114V |
| Min Supply Voltage | 9V |
| Power Dissipation-Max | 3.3W |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Current - Output | 2A |
| Turn On Delay Time | 8 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 8 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 0.045 µs |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HIP2100IRZT Overview
Gate drivers provides greater flexibilGate driversy to use the VQFN package.2 drivers are incorporated for its configuration.Mosfet driver is based on 16 terminations.Surface Mount is the way it takes to mount the device.Devices have 16 pins available.With a supply voltage of 12V, it is designed to operate.Mosfet driver is equipped wMosfet driverh an interface chip HALF BRIDGE BASED MOSFET DRIVER.The maximum output current can amount to 2A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The allowable maximum value of operating temperature is 150°C.Mosfet gate drivers is permissible to operate at a temperature of -55°C.Mosfet gate drivers is recommended to keep the supply current at 2.5mA to ensure greater stabilMosfet gate driversy.For operation, 114V is the maximum supply voltage.In order for the device to operate, a supply voltage of 9V must be applied.In this case, the current output is 2A.
HIP2100IRZT Features
2 drivers
16 pins
HIP2100IRZT Applications
There are a lot of Intersil (Renesas Electronics America) HIP2100IRZT gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- LCD/LCoS/DLP portable and embedded pico projectors
- UPS systems
- Active filtering
- Automotive Applications
- Motor Control
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- DC/DC converters
- DC-DC Converters
