HIP2101IR4Z
| Parameters | |
|---|---|
| Fall Time (Typ) | 10 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 0.056 µs |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 12 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 114V |
| Min Supply Voltage | 9V |
| Power Dissipation-Max | 3.3W |
| Nominal Supply Current | 1.7mA |
| Max Supply Current | 3mA |
| Current - Output | 2A |
| Turn On Delay Time | 13 ns |
| Rise Time | 20ns |
HIP2101IR4Z Overview
For greater flexibility, its DFN package is used.There are 12 terminations to form the base of its configuration.The mount method is Surface Mount.There are 12 pins available in the device.A supply voltage of 12V is required for operation.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.There is an output current limit of 2A for this device.There are various useful electronic components in its subcategory MOSFET Drivers.The basis of the model has 2 outputs integrated.Mosfet gate drivers is permissible to operate at a temperature of 125°C.The allowable minimum value of operating temperature is -40°C.In order to ensure greater stability, it is recommended to keep the supply current at 3mA.In order for the device to operate, the supply voltage must be 114V.For operation, 9V is the minimum supply voltage.2A is the current that it outputs.
HIP2101IR4Z Features
12 pins
HIP2101IR4Z Applications
There are a lot of Intersil (Renesas Electronics America) HIP2101IR4Z gate drivers applications.
- Broadcast equipment
- UPS systems
- serial peripheral interface (SPI), I2C
- Isolated Supplies for Motor Control
- Line drivers
- Motor Controls
- Commercial and agricultural vehicles (CAV)
- DC-DC Converters
- Commercial air-conditioning (CAC)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
