Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
DFN |
Number of Pins |
12 |
Weight |
82.298666mg |
Packaging |
Tape & Reel |
Published |
2010 |
JESD-609 Code |
e3 |
Moisture Sensitivity Level (MSL) |
3 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Pin Count |
12 |
Number of Outputs |
1 |
Max Output Current |
1A |
Operating Supply Voltage |
14V |
Max Supply Voltage |
60V |
Min Supply Voltage |
5V |
Power Dissipation-Max |
2.2W |
Operating Supply Current |
245μA |
Current - Output |
200mA |
Turn On Delay Time |
2.5 ms |
Voltage - Output |
4V |
Rise Time |
35ns |
Fall Time (Typ) |
30 ns |
Turn-Off Delay Time |
39 ns |
Interface IC Type |
HALF BRIDGE BASED MOSFET DRIVER |
Channel Type |
Independent |
Number of Drivers |
2 |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
HIP2104FRAANZ-T Overview
Gate drivers provides greater flexibilGate driversy to use the DFN package.A packaging method of Tape & Reel is indicated.Gate drivers is configured wGate driversh 2 drivers.You mount it with Surface Mount.There are 12 pins available in the device.The interface IC is referred to as HALF BRIDGE BASED MOSFET DRIVER.An output current as high as 1A can be achieved at maximum power.The number of component pins is 12.For its basis, 1 outputs are integrated.125°C is the maximum operating temperature that can be tolerated.There is a minimum operating temperature of -40°C.In order for the device to operate, the supply voltage must be 60V.In order for the device to operate, a supply voltage of 5V must be applied.The current it outputs is 200mA.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 14V.The supply voltage is 245μA.With a 4V output voltage, it works.
HIP2104FRAANZ-T Features
Embedded in the Tape & Reel package
2 drivers
12 pins
HIP2104FRAANZ-T Applications
There are a lot of Intersil (Renesas Electronics America) HIP2104FRAANZ-T gate drivers applications.
- Motor controllers
- High current laser/LED systems
- Multicolor LED/laser displays
- Head-up and Head mounted displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial air-conditioning (CAC)
- Topologies
- Pulse transformer drivers
- Portable computers
- Isolated Supplies for Motor Control