HIP2120FRTAZ-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 10 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SEATED HGT-NOM |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 14V |
| Min Supply Voltage | 8V |
| Power Dissipation-Max | 3W |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Current - Output | 2A |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| High Side Driver | YES |
| Turn Off Time | 60 µs |
| Height Seated (Max) | 0.75mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
HIP2120FRTAZ-T Overview
Configuration is based on 2 drivers.It's configured with 10 terminations.Surface Mount is the way it takes to mount the device.During design, it is configured with 10 pins.A supply voltage of 12V is required for operation.Its interface IC is HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 2A.There are several useful electronic components in this subcategory of MOSFET Drivers.There is a maximum value of 125°C for the allowable operating temperature.The allowable minimum value of operating temperature is -40°C.In order to ensure greater stability, it is recommended to keep the supply current at 4mA.For operation, 14V is the maximum supply voltage.A minimum supply voltage of 8V is required for operation.A current of 2A is output by the device.A unique technology can also be used to provide SEATED HGT-NOM.
HIP2120FRTAZ-T Features
2 drivers
10 pins
SEATED HGT-NOM
HIP2120FRTAZ-T Applications
There are a lot of Intersil (Renesas Electronics America) HIP2120FRTAZ-T gate drivers applications.
- Dual-Battery Systems
- Multicolor LED/laser displays
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- RGB applications
- Motor Drives
- Commercial air-conditioning (CAC)
- Commercial and agricultural vehicles (CAV)
- 3-Phase Motor Inverter Driver
- Isolated switch mode power supplies (SMPS)
- High frequency line drivers
