HIP2122FRTBZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 9 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Number of Terminations | 9 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Pin Count | 9 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 14V |
| Min Supply Voltage | 8V |
| Power Dissipation-Max | 3.1W |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Current - Output | 2A |
| Rise Time | 600ns |
| Fall Time (Typ) | 600 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Turn On Time | 60 µs |
| Output Peak Current Limit-Nom | 2A |
| High Side Driver | YES |
| Turn Off Time | 60 µs |
| Height Seated (Max) | 0.75mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
HIP2122FRTBZ Overview
Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Mosfet driver consists of 9 terminations as Mosfet drivers foundation.The device is mounted with Surface Mount.The pins are configured with 9 when designing the chip.The device is specifically designed to function with a supply voltage of 12V V.HALF BRIDGE BASED MOSFET DRIVER is employed as its interface IC.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board has a total of 9 component pins.There is a maximum acceptable operating temperature of 125°C.The allowable minimum value of operating temperature is -40°C.To maintain higher stability, the supply current should always be 4mA.Its maximum operating voltage is 14V.In order for it to operate, the supply voltage of 8V must be maintained.A current of 2A is output by the device.
HIP2122FRTBZ Features
2 drivers
9 pins
HIP2122FRTBZ Applications
There are a lot of Intersil (Renesas Electronics America) HIP2122FRTBZ gate drivers applications.
- Motor Drives
- Isolated Supplies for controller area network (CAN),
- Power factor correction (PFC) circuits
- Digitally controlled power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Automotive Applications
- High frequency line drivers
- Commercial and agricultural vehicles (CAV)
- Welding
- Topologies
