Parameters |
Mount |
Surface Mount |
Number of Pins |
9 |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Active |
Number of Terminations |
9 |
Terminal Finish |
MATTE TIN |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
MOSFET Drivers |
Terminal Position |
QUAD |
Number of Functions |
1 |
Supply Voltage |
12V |
Terminal Pitch |
0.8mm |
Pin Count |
9 |
Temperature Grade |
AUTOMOTIVE |
Max Supply Voltage |
14V |
Min Supply Voltage |
8V |
Power Dissipation-Max |
3.1W |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Current - Output |
2A |
Rise Time |
600ns |
Fall Time (Typ) |
600 ns |
Interface IC Type |
HALF BRIDGE BASED MOSFET DRIVER |
Number of Drivers |
2 |
Turn On Time |
60 μs |
Output Peak Current Limit-Nom |
2A |
High Side Driver |
YES |
Turn Off Time |
60 μs |
Height Seated (Max) |
0.75mm |
Length |
4mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
HIP2123FRTBZ-T Overview
2 drivers are incorporated for its configuration.It's configured with 9 terminations.Mounting the device requires Surface Mount.The pins are configured with 9 when designing the chip.A voltage of 12V is required for its operation.There is an interface IC called HALF BRIDGE BASED MOSFET DRIVER that is employed in this device.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.There are 9 component pins on the board.Operating temperatures cannot exceed 125°C.Mosfet gate drivers is permissible to operate at a temperature of -40°C.In order to ensure greater stability, it is recommended to keep the supply current at 4mA.When the supply voltage is 14V, it is at its maximum operation.The supply voltage of 8V is its minimum value for operation.2A is the output current.
HIP2123FRTBZ-T Features
2 drivers
9 pins
HIP2123FRTBZ-T Applications
There are a lot of Intersil (Renesas Electronics America) HIP2123FRTBZ-T gate drivers applications.
- Active filtering
- Industrial Modules
- Automotive Applications
- Solar power supplies
- Isolated switch mode power supplies (SMPS)
- High power buffers
- High-voltage isolated DC-DC converters
- General Purpose 3-Phase Inverter
- Isolated Supplies for controller area network (CAN),
- Uninterruptible Power Supplies (UPS)