HIP4081AIBZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Packaging | Bulk |
| Published | 1993 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Max Output Current | 2.6A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 95V |
| Min Supply Voltage | 9.5V |
| Max Supply Current | 15.5mA |
| Current - Output | 2.6A |
| Voltage - Output | 950mV |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Interface IC Type | FULL BRIDGE BASED MOSFET DRIVER |
| Turn On Time | 0.09 μs |
| Output Peak Current Limit-Nom | 2.6A |
| High Side Driver | YES |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HIP4081AIBZT Overview
The SOIC package provides greater flexibility.A packaging method of Bulk is indicated.Its configuration is based on a total of 20 terminations.Mosfet driver is mounted using Surface Mount.The pins are configured with 20 when designing the chip.In addition, it is specifically designed to operate with a supply voltage of 12V.Mosfet driver utilizes the interface IC FULL BRIDGE BASED MOSFET DRIVER.2.6A is the maximum output current.For its basis, there are 4 outputs integrated.There is a maximum value of 85°C for the allowable operating temperature.Mosfet gate drivers is permissible to operate at a minimum temperature of -40°C.For higher stability, the supply current should be kept at 15.5mA.For operation, 95V is the maximum supply voltage.In order for the device to operate, a supply voltage of 9.5V must be applied.Mosfet gate drivers outputs a current of 2.6A.As long as the output voltage is set to 950mV, it will work.
HIP4081AIBZT Features
Embedded in the Bulk package
20 pins
HIP4081AIBZT Applications
There are a lot of Intersil (Renesas Electronics America) HIP4081AIBZT gate drivers applications.
- High-speed communications
- Automotive Applications
- A/D drivers
- Portable computers
- Uninterruptible Power Supplies (UPS)
- Topologies
- serial peripheral interface (SPI), I2C
- 3-Phase Motor Inverter Driver
- Commercial and agricultural vehicles (CAV)
- Portable Media Players
