HIP4081AIBZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1993 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | MOS |
| Voltage - Supply | 9.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HIP4081A |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Output Voltage | 950mV |
| Output Current | 2.6A |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | FULL BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Turn On Time | 0.09 μs |
| Output Peak Current Limit-Nom | 2.6A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.6A 2.4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2.5V |
| Turn Off Time | 0.07 μs |
| High Side Voltage - Max (Bootstrap) | 95V |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
HIP4081AIBZT Overview
Its 20-SOIC (0.295, 7.50mm Width) package is adopted for higher flexibility.There is a package in the form of Cut Tape (CT).For its configuration, it incorporates 4 drivers.It's mounted on the way to Surface Mount.When the supply voltage is set to 9.5V~15V, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.-40°C~125°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Non-Inverting.Its configuration starts with 20 terminations.Numerous related parts can be found under its base part number HIP4081A.A voltage of 12V is required for its operation.Its interface IC is FULL BRIDGE BASED MOSFET DRIVER.A board with 20 component pins is available.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 95V.2.6A is the maximum output current supported by the device.In this case, it produces a voltage of 950mV.
HIP4081AIBZT Features
Embedded in the Cut Tape (CT) package
4 drivers
Employing a gate type of N-Channel MOSFET
High-side voltage - Max (Bootstrap) of 95V
HIP4081AIBZT Applications
There are a lot of Renesas Electronics America Inc. HIP4081AIBZT gate drivers applications.
- Topologies
- Smart Phones
- Telecom switch mode power supplies
- AC-DC Inverters
- Line drivers
- DC/DC converters
- Isolated Supplies for controller area network (CAN),
- Isolated Gate Driver Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Commercial and agricultural vehicles (CAV)
