HIP4081AIPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Packaging | Bulk |
| Published | 1993 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | MOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Max Output Current | 2.5A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 95V |
| Min Supply Voltage | 9.5V |
| Nominal Supply Current | 10.5mA |
| Max Supply Current | 15.5mA |
| Current - Output | 2.5A |
| Turn On Delay Time | 110 ns |
| Max Output Voltage | 15V |
| Voltage - Output | 12.6V |
| Frequency - Switching | 1MHz |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 90 ns |
| Interface IC Type | FULL BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 1 |
| Turn On Time | 0.09 µs |
| Output Peak Current Limit-Nom | 2.6A |
| High Side Driver | YES |
| Turn Off Time | 0.07 µs |
| Height | 4.95mm |
| Length | 26.9mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HIP4081AIPZ Overview
The PDIP package provides greater flexibility.Bulk represents the package.This device is equipped with 1 drivers for its configuration.Mosfet driver consists of 20 terminations as Mosfet drivers foundation.The device is mounted with Through Hole.During design, it is configured with 20 pins.The device is specifically designed to function with a supply voltage of 12V V.Mosfet driver is equipped wMosfet driverh an interface chip FULL BRIDGE BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 2.5A.In terms of its basis, there are 4 outputs integrated.Mosfet gate drivers is permissible to set the operating temperature to 85°C.Operating temperatures must not exceed -40°C.To maintain higher stability, the supply current should always be 15.5mA.For operation, the supply voltage of 95V is the maximum value.A supply voltage of 9.5V is the minimum value required to operate the device.The current it outputs is 2.5A.In this case, 12.6V is the output voltage.In this case, 15V should be set as the maximum output voltage.
HIP4081AIPZ Features
Embedded in the Bulk package
1 drivers
20 pins
HIP4081AIPZ Applications
There are a lot of Intersil (Renesas Electronics America) HIP4081AIPZ gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Solar inverters
- Line drivers
- Welding
- serial peripheral interface (SPI), I2C
- Pulse transformer drivers
- Industrial Power Supplies
- Industrial Modules
- Motor Drives
- DC-DC Converters
