HIP4082IPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 1994 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 8.5V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HIP4082 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Output Voltage | 86.3V |
| Output Current | 1.25A |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 9ns 9ns |
| Interface IC Type | FULL BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Turn On Time | 0.15 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.4A 1.3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2.5V |
| Turn Off Time | 0.1 µs |
| High Side Voltage - Max (Bootstrap) | 95V |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
HIP4082IPZ Overview
There is greater flexibility with the 16-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.The configuration is supported by 4 drivers.Through Hole is mounted in the way of the device.A supply voltage of 8.5V~15V demonstrates its superiority.N-Channel MOSFET is the gate type used for this design.-55°C~150°C TJ is the allowed temperature range for this device.Non-Inverting is used as its input type.16 terminations constitute its foundation.There are various parts that can be found under its base part number HIP4082.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.Mosfet driver employs an interface chip called FULL BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.The board has a total of 16 component pins.A high-side voltage can be set up to 95V (Bootstrap).Mosfet driver supports an output current of 1.25A.In this case, it produces a voltage of 86.3V.
HIP4082IPZ Features
Embedded in the Tube package
4 drivers
Employing a gate type of N-Channel MOSFET
High-side voltage - Max (Bootstrap) of 95V
HIP4082IPZ Applications
There are a lot of Renesas Electronics America Inc. HIP4082IPZ gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Motor controllers
- Motor Drives
- Commercial and agricultural vehicles (CAV)
- Industrial Modules
- Multicolor LED/laser displays
- AC-DC Inverters
- Dual-Battery Systems
- Motor Controls
- Commercial air-conditioning (CAC)
