HIP4086APZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 7V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HIP4086 |
| Pin Count | 24 |
| JESD-30 Code | R-PDIP-T24 |
| Output Voltage | 101.3V |
| Input Type | Inverting, Non-Inverting |
| Rise / Fall Time (Typ) | 20ns 10ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.158 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2.5V |
| Turn Off Time | 0.135 μs |
| High Side Voltage - Max (Bootstrap) | 95V |
| Height Seated (Max) | 5.33mm |
| Length | 31.875mm |
| RoHS Status | ROHS3 Compliant |
HIP4086APZ Overview
A higher degree of flexibility is achieved by adopting its 24-DIP (0.300, 7.62mm) package.Tube represents the packaging method.Gate drivers is configured wGate driversh 6 drivers.Ideally, it should be mounted in the direction of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 7V~15V supply voltage.This device is designed with a N-Channel MOSFET gate type.There is a temperature range for this device of -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.24 terminations constitute its foundation.Numerous related parts are available for its base part number HIP4086.Specification is for 12V supply voltage operation.The board has a total of 24 component pins.Ideally, the high-side voltage should not exceed 95V.101.3V is the output voltage.
HIP4086APZ Features
Embedded in the Tube package
6 drivers
Employing a gate type of N-Channel MOSFET
High-side voltage - Max (Bootstrap) of 95V
HIP4086APZ Applications
There are a lot of Renesas Electronics America Inc. HIP4086APZ gate drivers applications.
- Isolated Gate Driver Supplies
- Digitally controlled power supplies
- A/D drivers
- High power buffers
- Solar power supplies
- Line drivers
- Head-up and Head mounted displays
- Portable Navigation Devices
- LCD/LCoS/DLP portable and embedded pico projectors
- General Purpose 3-Phase Inverter
