banner_page

HMC778LP6CE

3.3V HMC778 Clock Generators 40 Pins 40-VFQFN Exposed Pad 40 Terminals Surface Mount 2.7V~5.25V Strip


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-HMC778LP6CE
  • Package: 40-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 983
  • Description: 3.3V HMC778 Clock Generators 40 Pins 40-VFQFN Exposed Pad 40 Terminals Surface Mount 2.7V~5.25V Strip (Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 40-VFQFN Exposed Pad
Number of Pins 40
Weight 117.310327mg
Operating Temperature -40°C~85°C
Packaging Strip
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 40
ECCN Code EAR99
Subcategory PLL or Frequency Synthesis Circuits
Technology CMOS
Voltage - Supply 2.7V~5.25V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 10.8GHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number HMC778
Pin Count 40
Qualification Status Not Qualified
Operating Supply Voltage 5V
Supply Voltage-Min (Vsup) 2.7V
Number of Circuits 1
Analog IC - Other Type PHASE LOCKED LOOP
Operating Supply Current 265mA
Supply Current-Max (Isup) 290mA
Input Clock
Ratio - Input:Output 1:1
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height Seated (Max) 0.9mm
Length 6mm
Width 6mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)

HMC778LP6CE Overview


Clock ICs are packaged using the Strip method. 40-VFQFN Exposed Pad contains this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are a total of 40 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. In this clock generator, Clock is used as the input to the clock. To access the electronic component's full performance, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.7V. This clock PLL works with a supply voltage of 2.7V~5.25V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. An IC that generates clocks specifically for microprocessors, this clock PLL is 40-bits in si40e. These related electrical parts are available for the base part number HMC778. The frequency synthesizer has 40 pins that are available. This time clock generator can handle a voltage of 5V as its supply voltage. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. By operating at a frequency of 10.8GHz, RF synthesizer is able to reali10.8GHze high efficiency. A supply current of 265mA is required to fully operate clock PLL. ICs such as this can be classified as PHASE LOCKED LOOP-RF synthesizers since they are analog. It is recommended that the time clock generator's maximum supply current does not exceed 290mA.

HMC778LP6CE Features


Available in the 40-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 5V

HMC778LP6CE Applications


There are a lot of Analog Devices Inc. HMC778LP6CE Clock Generators applications.

  • HDD recorders
  • Cellular/4G
  • Signal analyzer
  • Automatic control
  • Signal modulation and demodulation
  • Test equipment
  • Signal generator
  • Quenching?
  • Set-top boxes
  • Electronic countermeasures

Write a review

Note: HTML is not translated!
    Bad           Good