HMC988LP3ETR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 57.09594mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES ON 3.7 TO 5.5V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3.1V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HMC988 |
| Output | LVPECL |
| Pin Count | 16 |
| Operating Supply Voltage | 4.5V |
| Supply Voltage-Max (Vsup) | 3.5V |
| Power Supplies | 3.35V |
| Number of Circuits | 1 |
| Operating Supply Current | 68mA |
| Frequency (Max) | 4GHz |
| Family | 988 |
| Input | CML, CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:1 |
| Logic IC Type | LOGIC CIRCUIT |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
HMC988LP3ETR Overview
Clock generator is packaged in the way of Tape & Reel (TR). As part of the 16-VFQFN Exposed Pad package, this clock generator is embedded. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. In it, there are 16 terminations to be found. A voltage of 3.3V should be applied to this electronic frequency generator. There is a Clock PLL called CML, CMOS, LVDS, LVPECL which is designed to be the input to this clock generator. To access the electronic component's full performance, 1 circuits are implemented. There is a maximum frequency of 4GHz Max with this clock-based frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. The maximum voltage this clock PLL can handle is 3.5V. Clock generators should operate with the voltage supply of 3.1V~5.5V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. As the name suggests, this is a clock generator that is compatible with LVPECL logic levels. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. It is possible to find its related electronic parts by searching for the base part number HMC988. It is possible to connect to the frequency generators via 16 pins. The supply voltage should be maintained at 4.5V for high efficiency. This clock generator can be classified as a kind of Clock Drivers in general. ALSO OPERATES ON 3.7 TO 5.5V SUPPLY can also be founded when using frequency generators. When searching for parts of the 988 family, similar electronic components will be found. The logic IC PLL clock adopts is LOGIC CIRCUIT. Time clock generator requires a supply current of 68mA to fully function.
HMC988LP3ETR Features
Available in the 16-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 4.5V
HMC988LP3ETR Applications
There are a lot of Analog Devices Inc. HMC988LP3ETR Clock Generators applications.
- Jitter reduction
- Microprocessor clock multipliers
- DVD recorders
- Bluetooth receivers
- Set-top boxes
- Skew suppression
- Signal generator
- Local oscillator source in receiver
- Microwave backhaul IF
- Digital circuits
