HRPG-ASCA#54F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Panel, Through Hole |
| Mounting Type | Panel, PCB Through Hole |
| Number of Pins | 5 |
| Published | 2006 |
| Series | HRPG |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Rated DC | 5.5V |
| Voltage - Supply | 5V |
| Orientation | Vertical |
| Current Rating | 40mA |
| Termination Style | PC Pin |
| Actuator Type | 6mm Dia Round End |
| Output Type | Quadrature (Incremental) |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Built in Switch | No |
| Encoder Type | Optical |
| Detent | No |
| Pulses per Revolution | 120 |
| Rotational Life (Cycles Min) | 1M |
| RoHS Status | ROHS3 Compliant |
HRPG-ASCA#54F Overview
With the supply voltage of [O], encoders can perform well. A minimum operating temperature of 0°C is required so that an encoder works properly. It can still reach 70°C when operating at its maximum temperature. A 5 pin is located on each encoder. Encoders can carry an indefinite amount of current. It is recommended that the encoders be operated at 5.5V DC voltage.
HRPG-ASCA#54F Features
Series: HRPG
5V Supply Voltage
Termination: PC Pin
Current Rating: 40mA
5 pins
HRPG-ASCA#54F Applications
There are a lot of Broadcom Limited HRPG-ASCA#54F Encoders applications.
- War field flying robot with a using night-vision flying camera
- Communications equipment
- RF-based Home Automation System
- Medical Equipment
- Robotic Vehicle with Metal Detector
- Automatic health monitoring systems
- Factory automation equipment
- Tape drives
- War- Field -Flying Robot with a Night Vision Flying Camera
- Robotics vehicle with the metal detector
