HSCDANN001PD2A3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 8-DIP (0.524, 13.30mm), Top Port |
| Surface Mount | NO |
| Mounting Feature | THROUGH HOLE MOUNT |
| Number of Pins | 8 |
| Operating Temperature | -20°C~85°C |
| Published | 2011 |
| Series | TruStability® HSC |
| Feature | Amplified Output, Temperature Compensated |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Applications | Board Mount |
| Voltage - Supply | 3V~3.6V |
| Reach Compliance Code | unknown |
| Output | 12 b |
| Termination Style | PC Pin |
| Body Length or Diameter | 12.45mm |
| Body Breadth | 9.91 mm |
| Output Type | I2C |
| Operating Supply Voltage | 3.3V |
| Nominal Supply Current | 1.6mA |
| Max Supply Current | 2.1mA |
| Number of Bits | 12 |
| Accuracy | ±0.25% |
| Response Time | 460 μs |
| Operating Pressure | ±1PSI (±6.89kPa) |
| Pressure Type | Differential |
| Port Style | Barbed |
| Port Size | Male - 0.19 4.93mm Tube |
| Maximum Pressure | ±10PSI (±68.95kPa) |
| Sensors/Transducers Type | PRESSURE SENSOR,PEIZORESISTIVE |
| Max Supply Voltage (DC) | 3.6V |
| Min Supply Voltage (DC) | 3V |
| Housing | CERAMIC |
| Pressure Range-Max | 1 Psi |
| RoHS Status | RoHS Compliant |
HSCDANN001PD2A3 Overview
This transducer is included in the package 8-DIP (0.524, 13.30mm), Top Port for your convenience. Ensure reliable performance by setting the transducers to -20°C~85°C. When the supply voltage is 3V~3.6V, the transducers will operate well. There is a requirement for connecting the 8 pins to make the transducer work properly. A transducer of this type is capable of measuring pressures up to 1 Psi. If the nominal supply current is 1.6mA, the transducers will operate normally. The current of the transducers should not exceed 2.1mA, otherwise it will be dangerous.
HSCDANN001PD2A3 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 8-DIP (0.524, 13.30mm), Top Port
Operating Temperature: -20°C~85°C
8 Pins
TruStability? HSC series
Operating Pressure: ±1PSI (±6.89kPa)
Operating Supply Voltage: 3.3V
HSCDANN001PD2A3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions HSCDANN001PD2A3 Transducers applications.
- Vertical velocity monitoring
- Home weather stations
- Industrial control
- Automotive applications (barometric air pressure measurement)
- Medical instrumentation
- Waterproof watches and diving computers
- Drones ( e.g. flight stability, height control)
- Consumer applications
- Smart watches, wearable & smart phone ( e.g. altitude, fitness tracking, step counting, fall detection)
- Health care(e.g. fall detection, air flow monitoring, smart inhaler)
