HSDL-5420#021
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2-SMD, Yoke Bend |
| Number of Pins | 2 |
| Shape | ROUND |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | HSDL-5400 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Terminal Finish | TIN |
| HTS Code | 8541.40.60.50 |
| Number of Functions | 1 |
| Configuration | SINGLE |
| Diode Type | PIN |
| Power Dissipation | 150mW |
| Viewing Angle | 56° |
| Size | 1.78mm |
| Rise Time | 7.5ns |
| Forward Voltage | 800mV |
| Fall Time (Typ) | 7.5 ns |
| Max Reverse Voltage (DC) | 40V |
| Reverse Breakdown Voltage | 40V |
| Reverse Voltage | 40V |
| Wavelength | 875nm |
| Dark Current | 1nA |
| Spectral Range | 770nm ~ 1000nm |
| Active Area | 0.15mm2 |
| Infrared Range | YES |
| Light Current-Nom | 0.0016mA |
| RoHS Status | ROHS3 Compliant |
HSDL-5420#021 Overview
The photodiodes are packaged in the Tape & Reel (TR) to prevent damage. Photodiodes are protected by 2-SMD, Yoke Bend packages in order to ensure their safety. It is recommended to set the reverse-bias mode for the photodiodes to not exceed 40V on a continuous basis. There are 2 pins on the photodiodes. It is possible for the photodiodes within a circuit to release 150mW heat. For photodiodes, the reverse anode voltage should be 40V. In order to get current to flow across a photodiode, there must be a voltage of 800mV. Reverse-biased photodiodes could supply 40V voltage. It is possible for a photodiode to operate at 1nA current even if no light is provided.
HSDL-5420#021 Features
Moisture Sensitivity Level (MSL): 2A (4 Weeks)
Operating Temperature: -40°C~85°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 770nm ~ 1000nm
Viewing Angle: 56°
HSDL-5420#021 Applications
There are a lot of Lite-On Inc. HSDL-5420#021 Photodiodes applications.
- Electronic Equipment
- Light Bariers
- Optical Analytics
- Shaft encoders
- Photo interrupters
- LiDAR
- Sterilization Lamp Monitoring
- YAG laser detection
- Low Capacitance
- Infrared remote control
