HT0440K6-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3.15V~5.5V |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HT0440 |
| JESD-30 Code | R-PDSO-N8 |
| Output Voltage | 10V |
| Operating Supply Current | 10μA |
| Element Configuration | Dual |
| Nominal Supply Current | 10μA |
| Max Supply Current | 2mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Rise Time | 650μs |
| Fall Time (Typ) | 3 ms |
| Turn-Off Delay Time | 150 μs |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 650μs 3ms Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 3.15V |
| High Side Voltage - Max (Bootstrap) | 400V |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
HT0440K6-G Overview
A higher degree of flexibility is achieved by adopting its 10-VFDFN Exposed Pad package.A packaging method of Tape & Reel (TR) is used.Configuration is based on 2 drivers.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 3.15V~5.5V supply voltage.This gate type has a N-Channel MOSFET design.In this device, temperatures must not exceed -40°C~125°C TJ.The input type is Non-Inverting.The configuration starts with 10 terminations.The base part number HT0440 refers to a number of related parts.Surface Mount is the way it takes to mount the device.During design, it is configured with 10 pins.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.Maximum (Bootstrap) voltage is 400V.The supply current should be kept at 2mA to ensure higher stability.In this case, the voltage is 10V.The device operates on a voltage of 10μA as the supply voltage.A STANDARD character describes its input.
HT0440K6-G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 400V
HT0440K6-G Applications
There are a lot of Microchip Technology HT0440K6-G gate drivers applications.
- UPS systems
- Solar power supplies
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
- Industrial Modules
- Isolated Gate Driver Supplies
- General Purpose 3-Phase Inverter
- Industrial Motor Inverter - Power Tools, Robotics
- DC-DC Converters
- High frequency line drivers
