HT0440LG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 3.15V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HT0440 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 10V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 μs |
| Rise Time | 650μs |
| Fall Time (Typ) | 3 ms |
| Turn-Off Delay Time | 150 μs |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 650μs 3ms Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.5V 3.15V |
| High Side Voltage - Max (Bootstrap) | 400V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
HT0440LG-G Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.Surface Mount is the way in which it is mounted.A supply voltage of 3.15V~5.5V demonstrates its superiority.N-Channel MOSFET is the gate type used for this design.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Input type of Non-Inverting is used.As a result of its configuration, it contains a maximum of 8 terminations.The base part number HT0440 refers to a number of related parts.Mosfet driver is mounted using the Surface Mount method.A total of 8 pins are available on the device.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.There can be a voltage up to 400V on the high-side (Bootstrap).For its basis, there are 2 outputs integrated.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.The voltage it outputs is 10V.During operation, a voltage of 2mA is applied to the power supply.STANDARD represents its input.The frequency of 2MHz can be adjusted in order to improve efficiency.
HT0440LG-G Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 400V
HT0440LG-G Applications
There are a lot of Microchip Technology HT0440LG-G gate drivers applications.
- Motor controllers
- Portable Media Players
- Active filtering
- Portable Navigation Devices
- Isolated Supplies for controller area network (CAN),
- Solar inverters
- Topologies
- High frequency line drivers
- Power factor correction (PFC) circuits
- Active Clamp Flyback or Forward and Synchronous Rectifier
