HV256FG-G
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | -10°C~85°C |
| Packaging | Tray |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.33.00.01 |
| Subcategory | Operational Amplifier |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 32 |
| Supply Voltage | 6.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | HV256 |
| Number of Circuits | 32 |
| Operating Supply Current | 5mA |
| Slew Rate | 2.2V/μs |
| Amplifier Type | General Purpose |
| Max Input Voltage | 4.096V |
| Voltage - Supply, Single/Dual (±) | 6/-4.5V~7.5/-6.5V 125V~300V |
| Output Current per Channel | 500μA |
| Input Offset Voltage (Vos) | 50mV |
| Gain Bandwidth Product | 4 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5.5V |
| Power Supply Rejection Ratio (PSRR) | -40dB |
| Supply Voltage Limit-Max | 8V |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Height Seated (Max) | 3.15mm |
| Length | 20mm |
HV256FG-G Overview
There is a 100-BQFP case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tray case. The number of terminations approaches 100. This linear amplifier should be powered by an 6.5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 100 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 50mV voltage. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -10°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 5mA, this op amp ic can operate. During the manufacturing process, this buffer amplifier is divided into 32 circuits.
HV256FG-G Features
supply voltage of 6.5V
HV256FG-G Applications
There are a lot of Microchip Technology HV256FG-G Instrumentational OP Amps applications.
- Video data acquisition
- Image computer boards
- Mobile phone
- Switching amplifier
- Commercial audio systems
- Vehicle electronics
- Tablets
- Proportional counter tubes
- Ultrasound transducers
- Television broadcasting equipment
