HV2722/R4X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | HVCMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 16 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| JESD-30 Code | S-XQCC-N64 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 30Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 15μA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Circuit | SPST |
| Switch Time (Ton, Toff) (Max) | 6μs, 6μs |
| Charge Injection | 1000pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -70dB @ 5MHz |
| Switch-on Time-Max | 6000ns |
| Switch-off Time-Max | 6000ns |
| Voltage - Supply, Single (V+) | 3V~5.5V |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | ROHS3 Compliant |
HV2722/R4X Overview
Packed in 64-VFQFN Exposed Pad, the electronic component is convenient for shipping overseas. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around 0°C~70°C TA. There are 64 terminations totally. The electronic part delivers high-quality output through its 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. These analog multiplexers are built based on SPST switching circuits. There are 1 circuits in this multiplexer. A voltage of 3V~5.5V is required to drain this analog switch from a single voltage supply.
HV2722/R4X Features
1 Channels
Switch Circuit: SPST
HV2722/R4X Applications
There are a lot of Microchip Technology HV2722/R4X Analog Switches & Multiplexers ICs applications.
- Industrial
- Intelligent PBX
- Communication systems
- Mechanical reed relay replacement
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Channel Banks
- Low-Voltage
- Isolation
- Medical systems
- Communications systems
