HV9110NG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 338.011364mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HV9110 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | -2mA |
| Voltage - Supply (Vcc/Vdd) | 10V~120V |
| Control Features | Enable, Frequency Control, Reset |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 49.6 % |
| Duty Cycle (Max) | 49.4% |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
HV9110NG-G Overview
This switching controller fits most application requirements since it is packaged in a 14-SOIC (0.154, 3.90mm Width) package. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 10V~120V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -55°C~125°C TJ dc switcher. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Enable, Frequency Control, Reset for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . The 14 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. In addition to "HV9110", there are other relevant dc to dc converter ics you can find. In total, switching converter has 14 pins. According to the test statistics, DC regulator outputs 4V voltage. If you start a project, note down the dc dc regulator's usual output current of -2mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 49.6 %. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 3MHz Hz.
HV9110NG-G Features
Transistor Driver Outputs
Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 49.6 %
Frequency: 3MHz
HV9110NG-G Applications
There are a lot of Microchip Technology HV9110NG-G DC to DC converter applications.
- Imported equipment
- Automation technology
- Arc suppression circuits
- Smoke exhaust equipment
- Fire elevators
- Industrial robots
- Injection molding machinery
- Overvoltage protection circuits in TV sets
- seismic instrument power circuits
- Hydro power
