HV9112NG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 338.011364mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HV9112 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.12V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.5V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 9V~80V |
| Control Features | Enable, Frequency Control, Reset |
| Input Voltage (Min) | 9V |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 80V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 49.4 % |
| Duty Cycle (Max) | 49.4% |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
HV9112NG-G Overview
With a 14-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 9V~80V and has a 9V~80V supply voltage. Suitable for working in an dc switcher that has a -55°C~125°C TJ. dc dc regulator is made easier with Surface Mount. Enable, Frequency Control, Reset provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 14. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 48V. You can find other relevant dc to dc converter ics by searching "HV9112". There are a total of 14 pins on switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 9V. Statistically, DC regulator outputs 4.12V volts. The dc to dc regulator can only accept a maximum input voltage of 80V. Voltage regulator dc to dc is designed to operate at 49.4 % duty cycle during power-ups and power-downs to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. There is 3MHz frequency setting on the switching controller. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 13.5V.
HV9112NG-G Features
Transistor Driver Outputs
Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 49.4 %
Frequency: 3MHz
HV9112NG-G Applications
There are a lot of Microchip Technology HV9112NG-G DC to DC converter applications.
- Handheld GPS
- Digital display device
- Lathes
- Electric water heaters
- Combined machine tools
- Scientific research
- Constant current circuits
- Overvoltage protection circuits in TV sets
- Low output voltage switching power supply circuits
- Smoke exhaust equipment
