HV9113NG-G
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HV9113 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.5V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 750μA |
| Output Configuration | Positive |
| Output Current | -2mA |
| Voltage - Supply (Vcc/Vdd) | 10V~120V |
| Control Features | Enable, Frequency Control, Reset |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 99 % |
| Duty Cycle (Max) | 97% |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 338.011364mg |
HV9113NG-G Overview
As a result of 14-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tube enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 10V~120V. Worked in an dc switcher with a -55°C~125°C TJ rating. It can switch at 3MHz. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Reset. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. 14 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. Other relevant dc to dc converter ics can be found by searching "HV9113". 14 pins are present on switching converter. DC regulator outputs 13.5V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is -2mA, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 99 % during power-up and power-down. DC switcher's Surface Mount qualifies it for most applications and prototypes. Users should apply 13.5V to operate the voltage regulator dc to dc safely and reliably. A current of 750μA is supplied to it.
HV9113NG-G Features
Transistor Driver Outputs
Switching Frequency: 3MHz
Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
HV9113NG-G Applications
There are a lot of Microchip Technology HV9113NG-G DC to DC converter applications.
- Sink circuits
- Flexible manufacturing cells
- Thermal power
- Automation technology
- Cutting machine tools
- Nuclear power plants
- Printing
- Correction machines
- Power supplies of electronic gadgets
- Network technology
