HV9120P-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 3MHz |
| Base Part Number | HV9120 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.08V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.5V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | -2mA |
| Voltage - Supply (Vcc/Vdd) | 10V~450V |
| Control Features | Enable, Frequency Control, Reset |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 450V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 49.6 % |
| Duty Cycle (Max) | 49.4% |
| Height | 4.953mm |
| Length | 20.57mm |
| Width | 7.112mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HV9120P-G Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 10V~450V volts and has 10V~450V supply voltage. Work well in dc switchers with a -55°C~125°C TJ. A generalization of dc dc regulator can be made using Through Hole. To provide efficient switching control, Enable, Frequency Control, Reset is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 16 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. Searching "HV9120" will return other relevant dc to dc converter ics. 16 pins are on switching converter. Statistically, DC regulator outputs 4.08V volts. In most cases, the output current of the dc dc regulator will be -2mA, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 49.6 % on power-up or power-down to ensure reliability. Having a Through Hole makes DC switcher suitable for most application and prototype designs. 3MHz is the frequency of the switching controller. When running the voltage regulator dc to dc in a circuit, users should apply 13.5V to ensure safety and reliability. 450V is the nominal working voltage. The supply voltage should be 10V.
HV9120P-G Features
Transistor Driver Outputs
Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 49.6 %
Frequency: 3MHz
HV9120P-G Applications
There are a lot of Microchip Technology HV9120P-G DC to DC converter applications.
- Analog precision reference circuits
- Remotely powered electric motors
- Precision electronic equipment
- Ball screw pair
- Industrial controllers
- Driver circuits
- Computer rooms
- Program control systems
- Computer monitoring equipment of building
- Computer application technology
