HV9123NG-G
| Parameters | |
|---|---|
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 99 % |
| Duty Cycle (Max) | 97% |
| Height | 1.65mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 10V |
| Frequency | 3MHz |
| Base Part Number | HV9123 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 750μA |
| Output Configuration | Positive |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~450V |
| Control Features | Enable, Frequency Control, Reset |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 450V |
HV9123NG-G Overview
With its 16-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's10V~450V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -55°C~125°C TJ dc switcher. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Reset. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. Other relevant dc to dc converter ics will be returned if you search "HV9123". There are only 16 pins on switching converter. As determined by the test statistics, the output voltage of DC regulator is 13.5V. normally, the dc dc regulator's output current is 10mA, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 99 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controllers work at 3MHz Hz. For nominal working status, the input voltage can be set as 450V. Switching controller is necessary to supply a voltage of 10V. It runs on a 750μA supply current.
HV9123NG-G Features
Transistor Driver Outputs
Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 99 %
Frequency: 3MHz
HV9123NG-G Applications
There are a lot of Microchip Technology HV9123NG-G DC to DC converter applications.
- Flexible manufacturing cells
- Various precision measuring detectors
- Laboratories
- Experimental setup
- Smart grid
- Household control circuits
- Fire elevators
- Gear/thread machining machines
- Product burn-in
- Machining centers
