HV9123NG-G-M901
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 10V |
| Base Part Number | HV9123 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.5V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 10V~450V |
| Control Features | Enable, Frequency Control, Reset |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 3MHz |
| Input Voltage (Max) | 80V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 97 % |
| Output Voltage-Min | 3.84V |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
HV9123NG-G-M901 Overview
With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 10V~450V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -55°C~125°C TJ rating. The switching controller can be switched at 3MHz. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Enable, Frequency Control, Reset is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a DUAL terminal on the switching converters. 16 terminations with various dc switching's functions. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. Searching "HV9123" will return other relevant dc to dc converter ics. Switching converter has a total of 16 pins. 9V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 4V. A maximum voltage of 80V is accepted by the dc to dc regulator as an input voltage. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 97 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. To operate the voltage regulator dc to dc safely and reliably, users should apply 13.5V. Voltage 10V must be supplied.
HV9123NG-G-M901 Features
Transistor Driver Outputs
Switching Frequency: 3MHz
Enable, Frequency Control, Reset
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
HV9123NG-G-M901 Applications
There are a lot of Microchip Technology HV9123NG-G-M901 DC to DC converter applications.
- Hydrogen power
- Sensitive electronic devices
- Medical equipment
- Geothermal power
- Electric water heaters
- Network technology
- Wide-range voltage regulation circuits
- Sink circuits
- Game consoles
- Electrical power transmission
