HV9911NG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Backlight |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 100kHz 350kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HV9911 |
| Number of Outputs | 1 |
| Max Supply Voltage | 250V |
| Power Dissipation | 1W |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| Low Level Output Current | 400mA |
| Dimming | PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 9V |
| Multiplexed Display Capability | NO |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
HV9911NG-G Overview
Space is saved using its 16-SOIC (0.154, 3.90mm Width) package. There are 1 outputs used for the design of this LED drivers.It is possible to mount the led driver using Surface Mount.With high efficiency, it appears as a DC DC Controller.-40°C~85°C TA is the operating temperature for the led light driver.It provides considerable benefits for Backlight.In this case, the frequency is 100kHz 350kHz.The operation of this system is supported by 16 terminations.This configuration is built upon 16 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 9V.There are 1 segments.There is a device mounted on the Surface Mount.HV9911 is the base part number for the LED driver.A maximum supply voltage of 250V is acceptable.
HV9911NG-G Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 100kHz 350kHz
Supply voltage of 24V
HV9911NG-G Applications
There are a lot of Microchip Technology HV9911NG-G LED Driver ICs applications.
- High-end retail lighting
- General lighting
- Stage Lighting and Signage
- Portable lighting
- Linear fluorescent
- Down lighting
- Amusement Machines
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Refrigeration lighting
- White LED Backlight for portable equipment
