HV9922N3-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Weight | 453.59237mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 740mW |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Base Part Number | HV9922 |
| Number of Outputs | 1 |
| Max Output Current | 50mA |
| Power Supplies | 50V |
| Max Supply Voltage | 400V |
| Power Dissipation | 740mW |
| Output Current | 50mA |
| Max Supply Current | 350μA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Output Current per Channel | 50mA |
| Internal Switch(s) | Yes |
| Dimming | Triac |
| Max Input Voltage (DC) | 400V |
| Min Input Voltage (DC) | 20V |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
HV9922N3-G Overview
TO-226-3, TO-92-3 (TO-226AA) package saves space on the board. LED drivers use 1 outputs for their design.As a mounting method, Through Hole is used.Initially, it emerges as a AC DC Offline Switcher with high efficiency and a high degree of reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Lighting has significant advantages.In this case, the termination value is 3.To form its configuration, 3 pins are used.There are 1 segments.It's mounted on the way to Through Hole.It's under the HV9922 base part number.An acceptable maximum value for the supply voltage is 400V.In addition, its characteristics are classified into Display Drivers.This device operates with a minimum input voltage of 85V volts.Currently, the supply current can only reach 265V.It is possible to provide high efficiency when the maximal supply current is less than 350μA.Loads can only be powered by 50mA current.When operating at the maximum output current of 50mA, it is capable of providing all the benefits associated with LED drivers.
HV9922N3-G Features
Available in the TO-226-3, TO-92-3 (TO-226AA) package
Operating temperature of -40°C~85°C TA
Supply voltage of 7.5V
HV9922N3-G Applications
There are a lot of Microchip Technology HV9922N3-G LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- OLED power supply for portable equipment
- Stage and Studio lighting
- Stage Lighting and Signage
- Medical surgery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Gallery lighting
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Flicker-free LED Lighting using R1580N
