HV9923N3-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Weight | 453.59237mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 740mW |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Current Rating | 30mA |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | HV9923 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Power Supplies | 7.5V |
| Max Supply Voltage | 400V |
| Power Dissipation | 740mW |
| Output Current | 30mA |
| Max Supply Current | 350μA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 20V |
| Max Input Voltage | 400V |
| Output Current per Channel | 30mA |
| Max Output Power | 740mW |
| Internal Switch(s) | Yes |
| Dimming | Triac |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 20V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HV9923N3-G Overview
It saves board space with the TO-226-3, TO-92-3 (TO-226AA) package. A LED driver using this design has 1 outputs.Through Hole is used for mounting the led light driver.It emerges as a AC DC Offline Switcher, which is efficient and reliable.At -40°C~85°C TA, the led driver is capable of operating.There are many benefits for Lighting.For its operation, terminations with a value of 0 are used.Its configuration is based on 3 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 20V.1 segments are present.It's mounted in Through Hole.The LED driver can be found under the base part number HV9923.It is acceptable to operate with a supply voltage of 400V.Furthermore, it can be classified as Display Drivers based on its characteristics.This device requires a minimum input voltage of 20V.Supply current cannot exceed 400V.If the maximum supply current is less than 350μA, the device is capable of providing high efficiency.There is no current that can be supplied to the load.
HV9923N3-G Features
Available in the TO-226-3, TO-92-3 (TO-226AA) package
Operating temperature of -40°C~85°C TA
Supply voltage of 7.5V
HV9923N3-G Applications
There are a lot of Microchip Technology HV9923N3-G LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- Panel lighting
- Down lights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- LED headlights
- Architectural lighting
- Medical surgery lighting
