HV9925SG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 800mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Current Rating | 50mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HV9925 |
| Number of Outputs | 1 |
| Max Output Current | 50mA |
| Power Supplies | 7.5V |
| Max Supply Voltage | 400V |
| Power Dissipation | 800mW |
| Output Current | 50mA |
| Max Supply Current | 500μA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 85V |
| Max Input Voltage | 264V |
| Output Current per Channel | 50mA |
| Max Output Power | 850mW |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Max Input Voltage (DC) | 400V |
| Min Input Voltage (DC) | 20V |
| Multiplexed Display Capability | NO |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HV9925SG-G Overview
On the board, there is also a 8-SOIC (0.154, 3.90mm Width) Exposed Pad package that saves space.A LED driver using this design has 1 outputs.Mounting is done according to the Surface Mount method.As a AC DC Offline Switcher, it has high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.There are considerable benefits for Lighting.In this case, the terminations are set to 8.It has a base configuration of 8 pins.The mount is on its way to Surface Mount.The LED driver is available under the part number HV9925.The supply voltage of 400V is an acceptable maximum value.As a result of its characteristics, it is also classified as Display Drivers.A minimal input voltage of 85V is required for it to operate.Supply current cannot exceed 264V.When the maximum supply current is less than 500μA, this device is capable of providing high efficiency.There is no current available to supply to the load.LED drivers deliver all their benefits with a maximum output current of 50mA.
HV9925SG-G Features
Available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 7.5V
HV9925SG-G Applications
There are a lot of Microchip Technology HV9925SG-G LED Driver ICs applications.
- Sports Facility Lighting
- LED Lightings for Inspection Devices
- General lighting
- LED Lightings for Industrial Equipment
- High-end retail lighting
- Medical surgery lighting
- Portable lighting
- OLED power supply for portable equipment
- Other Electronic Devices
- Stage Lighting and Signage
