HV9980WG-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 1.098005g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Backlight, Lighting |
| Max Power Dissipation | 1.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 8V |
| Terminal Pitch | 1.27mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HV9980 |
| Number of Outputs | 3 |
| Max Output Current | 80mA |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.3W |
| Max Supply Current | 3mA |
| Voltage - Output | 200V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 100V |
| Max Input Voltage | 160V |
| Output Current per Channel | 80mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HV9980WG-G Overview
In order to save board space, the 24-SOIC (0.295, 7.50mm Width) package is used. LED drivers designed using this technology use 3 outputs.It is possible to mount the led driver using Surface Mount.With high efficiency, it emerges as a DC DC Regulator.-40°C~85°C TA is a valid operating temperature for the led driver.There are many benefits for Backlight, Lighting.Frequency 500kHz is the basis of operation.The operation of this system is supported by 24 terminations.There are 24 pins on the base of this LED driver.In total, it includes 3 segments.The device has been mounted on the Surface Mount.It is under the base part number HV9980 that you can find this LED driver.The supply voltage of 10V is an acceptable maximum value.A 200V volt output voltage is provided by this device.A voltage of 100V is its minimal input voltage.For highest efficiency, it works with a minimal supply voltage of -300mV.In the case of supply current, there is a maximum value of 160V.It is possible to provide high efficiency when the maximal supply current is less than 3mA.When operating with a maximum output current of 80mA, it can deliver all the benefits of a LED driver.
HV9980WG-G Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 500kHz
Supply voltage of 8V
HV9980WG-G Applications
There are a lot of Microchip Technology HV9980WG-G LED Driver ICs applications.
- Down lights
- LED Lightings for Industrial Equipment
- Linear fluorescent
- Down lighting
- Architectural lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Portable lighting
- Gallery lighting
- Medical surgery lighting
