Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
7-DIP Module |
Number of Pins |
7 |
Weight |
2.26799g |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2004 |
Series |
CoolSET®F2 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Power Rating |
29W |
Max Power Dissipation |
29W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
ICE2A180 |
Pin Count |
7 |
Qualification Status |
Not Qualified |
Output Voltage |
800V |
Operating Supply Voltage |
21V |
Input Voltage-Nom |
15V |
Number of Channels |
1 |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
1A |
Output Current |
1A |
Voltage - Supply (Vcc/Vdd) |
8.5V~21V |
Output Power |
31W |
Control Features |
Soft Start |
Topology |
Flyback |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
100kHz |
Halogen Free |
Halogen Free |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
30ns |
Drain to Source Voltage (Vdss) |
800V |
Nominal Input Voltage |
265V |
Switcher Configuration |
SINGLE |
Max Dual Supply Voltage |
800V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage |
Max Duty Cycle |
72 % |
Max Supply Voltage (AC) |
264V |
Output Isolation |
Isolated |
Voltage - Start Up |
13.5V |
Min Supply Voltage (AC) |
90V |
Length |
9.52mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
ICE2A180ZXKLA1 Overview
The ac to dc converter is embedded in 7-DIP Module package.The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.At this point, the switching frequency reaches 100kHz .A range of 8.5V~21V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 7 terminations.In this ac/dc converter, there are 7 pins.There are 7 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .A member of the CoolSET?F2 manufacturer family, it has the following characteristics.A similar acdc converter can be searched by using the ICE2A180 family.We are setting the output current to 1A .Its output voltage is800V .In the AC to DC transformer of a coverter, the output power generated is 31W .As soon as the supply voltage drops to 21V , the interface IC conducts.A minimum voltage supply across the converter is 90V .264V is the maximum supply voltage across the converter.In total, there are 1 channels.
ICE2A180ZXKLA1 Features
Packaged with 7-DIP Module
Switching Frequency at 100kHz
With 7 pins
Output Current at 1A
Operating Supply Voltage at the range of 21V
With 1 channels on it
ICE2A180ZXKLA1 Applications
There are a lot of Infineon Technologies ICE2A180ZXKLA1 AC DC Converters applications.
- DVD players
- Power tools
- Tablets
- Dimmers
- Auxiliary Power Supply
- Battery chargers for cordless
- AC/DC LED Driver applications
- IoT Applications
- SMPS house keeping power supplies
- Standby power supplies for TV