ICE2A280Z
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | CoolSET®F2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 50W |
| Max Power Dissipation | 50W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ICE2A280 |
| Pin Count | 7 |
| Qualification Status | Not Qualified |
| Output Voltage | 800V |
| Operating Supply Voltage | 21V |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 7.7mA |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~21V |
| Output Power | 50W |
| Control Features | Soft Start |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Drain to Source Voltage (Vdss) | 800V |
| Fall Time (Typ) | 30 ns |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Max Dual Supply Voltage | 800V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 77 % |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.5V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.8mm |
| Length | 9.77mm |
| Width | 6.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ICE2A280Z Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The AC/DC power converter Tube is available for this product.This AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.As soon as the switching frequency reaches 100kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 8.5V~21V .There are a total of 7 terminations.There are 7 pins on the ac/dc converter.The pins of the ac-dc converter count up to 7 .Through Hole are the recommended mounting method for the ac dc converters.It belongs to the family of CoolSET?F2 manufacturers.Based on the ICE2A280 family, you can search for similar acdc converters.The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 2A .Its output voltage amounts to 800V .In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .The output power of a coverter generates 50W .An input voltage of less than 85V volts can be used with the AC to DC inverter.An interface IC conducts when its supply voltage is 21V .An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.In total, there are 1 channels.
ICE2A280Z Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 2A
Operating Supply Voltage at the range of 21V
With 1 channels on it
ICE2A280Z Applications
There are a lot of Infineon Technologies ICE2A280Z AC DC Converters applications.
- MP3
- Utility meters
- Cellular phone chargers
- Adapter for ADSL
- ATX/BTX Auxiliary Power
- Set-top boxes
- Set Top Boxes (STB)
- RCC SMPS
- Battery chargers for media tablets
- MPS parts
