ICE2PCS02HKLA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 11V~25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ICE2PCS02 |
| Pin Count | 8 |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 11.7V |
| Output Current-Max | 2A |
| Frequency - Switching | 65kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 13mA |
| Switcher Configuration | BOOST |
| Mode | Continuous Conduction (CCM) |
| Current - Startup | 450μA |
| Height Seated (Max) | 4.37mm |
| Length | 9.52mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ICE2PCS02HKLA1 Overview
A 8-DIP (0.300, 7.62mm) package contains it.In terms of packaging, it is in the form of a Tube.It has a Through Hole mounting type.With a voltage supply of 11V~25V, it should work.Currently, the device is set to operate at a frequency of -40°C~125°C TJ.POWER FACTOR CONTROLLER is another IC type on the part.8 terminals are found on the gadget.Currently, the startup current is 450μA.There is no change to the pin number of the component.I think the best thing about this device is that there is a number of ICE2PCS02 in it.There is a frequency 65kHz associated with switching.There are 8 pins in this board, which make up its sum.It can function with a minimum input voltage of 11.7V.I suppose it can be considered a subclass of Switching Regulator or Controllers.The output voltage (Max) of this device is 25V.There is a mountain on the other side of it called Mount Through Hole.In terms of output current, it works at the maximum in 2APower for the component is always provided by a 18V volt supply.If isup is greater than 13mA, then the supply current is too high.
ICE2PCS02HKLA1 Features
ICE2PCS02HKLA1 Applications
There are a lot of Infineon Technologies ICE2PCS02HKLA1 PFC PMICs applications.
- Automated test equipment
- Position detection
- Communication device
- High Speed/High Precision Data Converters
- Smartcard
- Smart buildings
- Fans
- Vibration sensor
- Laboratory
- Engine management
