ICE2PCS03GXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 11V~25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ICE2PCS03 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 18V |
| Power Supplies | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 11.7V |
| Output Current-Max | 2A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 16mA |
| Switcher Configuration | BOOST |
| Mode | Continuous Conduction (CCM) |
| Current - Startup | 450μA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
ICE2PCS03GXUMA1 Overview
Currently, it is available as a 8-SOIC (0.154, 3.90mm Width) package.In terms of packaging, it is in the form of a Tape & Reel (TR).Depending on the device, the mounting type will either be Surface Mount or C.In order to operate, it should be plugged into 11V~25V's voltage supply.At -40°C~125°C, the device operates.Besides POWER FACTOR CONTROLLER, there are other types of IC in this part.A number of 8 terminals can be found on the device.Startup current is 450μA.There are a number of ICE2PCS03s in the device's best feature.There is a frequency 100kHz associated with switching.There are 8 pins in this board, which make up its sum.Minimum input voltage is 11.7V, and it can function on this voltage.It's a subclass of Switching Regulator or Controllers in a way.The output voltage (Max) of this device is 25V.In terms of output current, it works at the maximum in 2AAs a rule of thumb, the component is always powered by a 18V volt supply.16mA is the maximum supply current.It is supplied by 18V supplies that make up this device.
ICE2PCS03GXUMA1 Features
ICE2PCS03GXUMA1 Applications
There are a lot of Infineon Technologies ICE2PCS03GXUMA1 PFC PMICs applications.
- Medical Applications: Diagnostics and Imaging
- VCO (Voltage-Controlled Oscillator)
- HVAC (Heating, Ventilation, and Air Conditioning)
- Transmissioin control
- Car wiper
- LED lighting
- Gateway module
- Position detection
- EPS (Electric Power Steering)
- PLL (Phase-Locked Loop)
