ICE3A2565FKLA1
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ICE3A2565 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 650V |
| Operating Supply Voltage | 21V |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Voltage | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~21V |
| Control Features | Soft Start |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 77 % |
| Drain to Source Resistance | 650mOhm |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 4.37mm |
| Length | 9.52mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -25°C~130°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Series | CoolMOS™, CoolSET™F3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 68W |
| Max Power Dissipation | 68W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
ICE3A2565FKLA1 Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .You can get it in AC/DC power converter Tube .Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -25°C~130°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.There is 100kHz switching frequency.Vcc/Vdd can be used within the range of 8.5V~21V supply voltage.There are a total of 8 terminations in it.There are 8 pins on this ac/dc converter.Up to 8 pins are present on the ac-dc converter.This AC to DC converter belongs to the CoolMOS?, CoolSET?F3 manufacturer family.It is possible to search for similar acdc converters by using the ICE3A2565 family.Switching Regulator or Controllers contains the ac to dc conversions.This AC/DC converter produces a voltage of 650V as its output.You can read the standard for REACH SVHC at: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.Interface ICs conduct when the supply voltage is 21V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .In total, there are 1 channels.
ICE3A2565FKLA1 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Operating Supply Voltage at the range of 21V
With 1 channels on it
ICE3A2565FKLA1 Applications
There are a lot of Infineon Technologies ICE3A2565FKLA1 AC DC Converters applications.
- Z-Wave
- Standby Power Supplies
- DVD players
- SMPS house keeping power supplies
- Adapter/Charger for Cell
- Universal Off-Line Power Supplies
- Adapter/Charger for Cordless Phones
- Wireless System
- Set-top boxes
- Standby power supplies for TV
