ICE3A5065PBKSA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-6 Formed Leads |
| Operating Temperature | -25°C~130°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Series | CoolMOS™, CoolSET™F3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 220W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ICE3A5065 |
| Pin Count | 3 |
| JESD-30 Code | R-XZFM-T6 |
| Qualification Status | Not Qualified |
| Output Voltage | 650V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 5kA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~21V |
| Control Features | Soft Start |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 21V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 77 % |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| RoHS Status | RoHS Compliant |
ICE3A5065PBKSA1 Overview
In the package TO-220-6 Formed Leads , the ac to dc converter is embedded.In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -25°C~130°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .In this AC to DC transformer, the switching frequency is 100kHz .This AC/DC converter is designed for use within the range of 8.5V~21V supply voltage (Vcc/Vdd).Total terminations are 6 .In this ac-dc converter, there are 3 pins.Through Hole is the recommended mounting method for the ac dc converters.The AC to DC converter belongs to the manufacturer family of CoolMOS?, CoolSET?F3 .It is possible to search for similar acdc converters by using the ICE3A5065 family.The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 5kA .There is 650V output voltage from this AC/DC converter.Based on a unique technique, the input voltage can be ensured to have the maximal value of 21V .
ICE3A5065PBKSA1 Features
Packaged with TO-220-6 Formed Leads
Switching Frequency at 100kHz
Output Current at 5kA
ICE3A5065PBKSA1 Applications
There are a lot of Infineon Technologies ICE3A5065PBKSA1 AC DC Converters applications.
- SMPS house keeping power supplies
- AC?DC USB chargers for Cameras
- Standby power supplies for IR
- Power Adaptors
- Low power ac?dc Adapters for Chargers
- Standby Power Supply
- Auxiliary Power Supplies
- Off--line Battery Charger
- Power tools fast chargers with trickle and on/off
- MPS parts
