ICL7612DCSA
| Parameters | |
|---|---|
| Number of Circuits | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 15μA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±1V~8V |
| Input Offset Voltage (Vos) | 15mV |
| Gain Bandwidth Product | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 44 kHz |
| Voltage Gain | 104dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | YES |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ICL7612 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
ICL7612DCSA Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. Op amp rates 15mV as input offset voltage. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at 0°C~70°C. Using an 1mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. On this buffer amplifier, there are 1 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V.
ICL7612DCSA Features
8 Pins
supply voltage of 5V
104dB voltage gain
Output Type: Rail-to-Rail
ICL7612DCSA Applications
There are a lot of Maxim Integrated ICL7612DCSA Instrumentational OP Amps applications.
- Car stereo
- Proportional operation circuits
- Home audio systems
- Automation control systems
- single/dual op amp sum and difference circuits
- Blood pressure sensors
- High/low-pass filter circuit
- Exponential operation circuits
- Gaming industry
- Polarized electrodes
