ICL7631CCSE

1pA 60 dB Instrumentational OP Amps 0.004μA 8V 2V~16V ±1V~8V ICL7631 16 Pins 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-ICL7631CCSE
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 102
Description: 1pA 60 dB Instrumentational OP Amps 0.004μA 8V 2V~16V ±1V~8V ICL7631 16 Pins 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2006
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	3
Supply Voltage	5V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	ICL7631
Pin Count	16
JESD-30 Code	R-PDSO-G16
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Power Supplies	+-1/+-8/2/16V
Number of Circuits	3
Operating Supply Current	1mA
Nominal Supply Current	15μA
Slew Rate	1.6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2V~16V ±1V~8V
Input Offset Voltage (Vos)	10mV
Gain Bandwidth Product	1.4MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	44 kHz
Voltage Gain	90dB
Average Bias Current-Max (IIB)	0.004μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	9V
Low-Bias	YES
Bias Current-Max (IIB) @25C	0.00005μA
Programmable Power	YES
Height Seated (Max)	1.75mm
Length	9.9mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ICL7631CCSE Overview

A 16-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used for delivering the op amp. A total of 16 terminations have been reported in the past few weeks. Linear amplifier has a total of 16 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. Regarding input offset voltage, buffer amplifier rates 10mV voltage. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. This op amp can operate from a supply current at 1mA. 90dB should remain the voltage gain. There are 3 circuits on this op amp. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 8V voltage.