ICL7650SCBA-1Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 3mA |
| Slew Rate | 2.5 V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 4pA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | NO |
| Min Dual Supply Voltage | 2.25V |
| Programmable Power | NO |
| Length | 4.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ICL7650SCBA-1Z Overview
Op amp is packaged in SOIC case. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. It is estimated that there will be at least 8 terminations this year. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There is an input offset voltage of 700μV for this buffer op amp. Using an 2mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 150dB at all times. Instrumentation amplifier has 1 channels on it. It should not lower than 0°C to operate buffer amplifier. A temperature greater than 70°C should not be used for the operation of this instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 15V. Under 16V is the minimum supply voltage for this electric component. A high supply voltage of more than 4.5V is recommended for the instrumentation amplifier's supply voltage. This electronic part should be conducted with a dual supply voltage of 8V volts for this part.
ICL7650SCBA-1Z Features
supply voltage of 5V
150dB voltage gain
ICL7650SCBA-1Z Applications
There are a lot of Intersil (Renesas Electronics America) ICL7650SCBA-1Z Instrumentational OP Amps applications.
- Thermocouples
- High speed sample
- Image computer boards
- Commercial audio systems
- Automatic control
- High/low-pass filter circuit
- Industrial applications including automation
- Voltage regulation circuit
- Mobile phone
- Polarized electrodes
