ICL7660CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Output Type | Fixed |
| Max Output Current | 225μA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Nominal Supply Current | 80μA |
| Output Configuration | Positive or Negative |
| Current - Output | 20mA |
| Max Output Voltage | -1.5V |
| Voltage - Output (Min/Fixed) | -Vin nVin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz |
| Supply Current-Max (Isup) | 0.225mA |
| Synchronous Rectifier | No |
| Min Output Voltage | -10V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 4.572mm |
| Length | 9.91mm |
| Width | 7.11mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7660CPA+ Overview
A Tube package is used in this voltage regulator to optimize performance. In this voltage regulator, there are a total of 8 terminations. A SWITCHED CAPACITOR CONVERTER type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-DIP (0.300, 7.62mm) package. There are 1 outputs on DC DC switching regulator. On the output pins of this DC DC switching regulator, there is a Fixed output generated. Switching regulators like this one can be mounted on the Through Hole mounting system. When operating, adjusting voltage regulator's operating temperature should be kept at 0°C~70°C TA. DC-DC switching regulators reach 10kHz switching frequencies. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to -Vin nVin Vin/2. This voltage regulator 12v offers maximum design flexibility with an output current of 20mA. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 5V. A voltage regulator 12v such as this falls under the Other Analog ICs category and belongs to this category. As a member of the ICL7660 family of DC/DC regulators, this is a DC/DC regulator. A voltage of 20V volts can be produced by voltage regulator. For switching regulator operation, 8 pins are used. For this switching regulator, it is recommended that the output voltage is at least -10V volts. A 225μA A maximum output current is required to meet the switching regulator operation requirements. With a maximum output voltage of -1.5V, DC DC switching regulator has a very high efficiency. An operating voltage of 1.5VV ensures adjusting voltage regulator reliable performance. DC DC switching regulator can be operated from a voltage of 10V as its maximum supply voltage.
ICL7660CPA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
ICL7660CPA+ Applications
There are a lot of Maxim Integrated ICL7660CPA+ Voltage Regulators applications.
- Post equipment
- Low output voltage switching power supply circuits
- Wind power
- Production lines
- Domestic water pumps
- Lathes
- Program control systems
- Telecommunications equipment
- Textile machinery
- Hydrogen power
