ICL7660CSA+
| Parameters | |
|---|---|
| Frequency | 10kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Output Type | Fixed |
| Max Output Current | 20mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Nominal Supply Current | 80μA |
| Output Configuration | Positive or Negative |
| Power Dissipation | 471mW |
| Max Output Voltage | 20V |
| Voltage - Output (Min/Fixed) | -Vin nVin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Supply Current-Max (Isup) | 0.225mA |
| Synchronous Rectifier | No |
| Dropout Voltage | 650mV |
| Min Output Voltage | 3V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
ICL7660CSA+ Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. There are 8 terminations in this harley voltage regulator. A SWITCHED CAPACITOR CONVERTER type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. For space-saving purposes, this voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. In this case, DC DC switching regulator has 1 outputs configured to it. This DC DC switching regulator generates Fixed output on its output pins. There is a switching regulator that is compatible with the Surface Mount mounting. Voltage regulators should be operated at 0°C~70°C TA temperature while operating. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to -Vin nVin Vin/2. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 5V to meet the operation requirements. In terms of category, this voltage regulator 12v falls into the Other Analog ICs category. As part of the ICL7660 series of regulators, the voltage regulators can be found. Voltage regulator is capable of giving voltage at 20V volts. For switching regulator operation, 8 pins are used. Ideally this switch regulator should have an output voltage of about 3V at the very least. The maximum output current reaches 20mA A to meet the switching regulator operation requirements. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 20V. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 1.5V V is required. The maximum supply voltage for the voltage regulator 12v is 10V, so DC DC switching regulator can operate with a maximum voltage of 10V. A frequency of 10kHz permits DC DC switching regulator to maintain a high level of accuracy.
ICL7660CSA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
ICL7660CSA+ Applications
There are a lot of Maxim Integrated ICL7660CSA+ Voltage Regulators applications.
- Large fire protection systems
- Computer rooms
- Flexible manufacturing cells
- Low output voltage switching power supply circuits
- Imported equipment
- Lathes
- Fire elevators
- Program control systems
- Printing equipment
- Analog precision reference circuits
