ICL7660CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Output Type | Fixed |
| Voltage - Input (Min) | 1.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Nominal Supply Current | 80μA |
| Output Configuration | Positive or Negative |
| Current - Output | 20mA |
| Voltage - Output (Min/Fixed) | -Vin nVin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz |
| Supply Current-Max (Isup) | 0.225mA |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7660CSA+T Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, 8 terminations are present. A SWITCHED CAPACITOR CONVERTER analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Space-saving 8-SOIC (0.154, 3.90mm Width) packages are available for this harley voltage regulator. In this case, DC DC switching regulator has 1 outputs configured to it. DC DC switching regulators like this one generate Fixed outputs on their output pins to handle the power management. The voltage regulator 12v fits the Surface Mount mounting hole. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at 0°C~70°C TA. This voltage regulator 12v reaches a switching frequency of 10kHz. A dc to dc voltage regulator's minimum input voltage of 1.5V is required for this voltage regulator to operate. DC DC switching regulator's output voltage (Min/Fixed) amounts to -Vin nVin Vin/2. DC DC switching regulator's 20mA output current allows for maximum design flexibility. Its 260 peak reflow temperature makes this regulator essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 5V for the purposes of operation. DC DC switching regulator is part of the Other Analog ICs subcategory and can be found in the Other Analog ICs category. As part of the ICL7660 series of regulators, the voltage regulators can be found. The adjusting voltage regulator's output voltage is maintain at 20V. During switching regulator operation, 8 pins are used. By requiring a minimum voltage of 1.5VV, adjusting voltage regulator reliable performance is guaranteed. A maximum supply voltage of 10V can be used to operate the voltage regulator 12v.
ICL7660CSA+T Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
ICL7660CSA+T Applications
There are a lot of Maxim Integrated ICL7660CSA+T Voltage Regulators applications.
- Emergency lighting monitoring equipment
- Program control systems
- Industrial robots
- Injection molding machinery
- Access control systems
- Telecommunications equipment
- PSRR circuits
- Sink circuits
- Machining centers
- Textile machinery
