ICL7660ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 10kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Output Type | Fixed |
| Max Output Current | 20mA |
| Input Voltage-Nom | 5V |
| Voltage | 10V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Nominal Supply Current | 80μA |
| Output Configuration | Positive or Negative |
| Max Output Voltage | 20V |
| Voltage - Output (Min/Fixed) | -Vin nVin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Supply Current-Max (Isup) | 0.25mA |
| Synchronous Rectifier | No |
| Dropout Voltage | 650mV |
| Min Output Voltage | 3V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7660ESA+ Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. In this voltage regulator, 8 terminations are present. There is a SWITCHED CAPACITOR CONVERTER type analog IC in this voltage regulator 12v that is used to convey analog signals. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-SOIC (0.154, 3.90mm Width) package. There are 1 outputs configured on this voltage regulator 12v. On the output pins of this DC DC switching regulator, there is a Fixed output generated. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. The output voltage (Min/Fixed) of this voltage regulator 12v is -Vin nVin Vin/2. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 5V. The regulator voltage that you are looking at belongs to the subcategory Other Analog ICs. ICL7660 is a family of voltage regulators that belong to the DC/DC industry. The adjusting voltage regulator's output voltage is maintain at 20V. There are 8 pins used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 3V volts. A 20mA A maximum output current is required to meet the switching regulator operation requirements. With a maximum output voltage of 20V, DC DC switching regulator has a very high efficiency. In this case, a dc to dc voltage regulator's minimum supply voltage of 1.5V volts is required to ensure reliable performance. It is able to operate from a maximum supply voltage of 10V, which is suitable for DC DC switching regulator's operation. A frequency of 10kHz enables dc to dc voltage regulator to maintain high accuracy.
ICL7660ESA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
ICL7660ESA+ Applications
There are a lot of Maxim Integrated ICL7660ESA+ Voltage Regulators applications.
- Ball screw pair
- Wind power
- Smart grid
- Automatic testing equipment
- Window air conditioners
- CMM
- Terrestrial set-top boxes
- Cutting machine tools
- Constant current circuits
- Servo drive system
