ICL7660ISA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7660 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Output Type | Fixed |
| Voltage - Input (Min) | 1.5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Operating Supply Current | 175μA |
| Nominal Supply Current | 80μA |
| Output Configuration | Positive or Negative |
| Current - Output | 20mA |
| Voltage - Output (Min/Fixed) | -Vin nVin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 10kHz |
| Synchronous Rectifier | No |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7660ISA+ Overview
A Tube package is used in this voltage regulator to optimize performance. During the development of this harley voltage regulator, 8 terminations were made. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR CONVERTER ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this harley voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. There are 1 outputs configured on the voltage regulator. There are output pins on this DC DC switching regulator that generate Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. As long as its operating temperature is -20°C~85°C TA, dc to dc voltage regulator should perform well. A DC-DC switching regulator such as this one switches at 10kHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 1.5V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to -Vin nVin Vin/2. Featuring a maximum design flexibility of 20mA, dc to dc voltage regulator has a maximum output current of 20mA. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 5V is required for switching regulator operation. Listed under the subcategory of Other Analog ICs is this voltage regulator 12v. DC/DC regulators of this type are part of the ICL7660 family of voltage regulator 12vs. There is a possibility that DC DC switching regulator can give voltage at 20V volts. In order to operate voltage regulator, 8 pins are required. An operating voltage of 1.5VV ensures adjusting voltage regulator reliable performance. As long as the supply voltage is greater than 10V, the voltage regulator 12v will operate correctly. The DC-DC switching regulator runs on a 175μA supply current.
ICL7660ISA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
ICL7660ISA+ Applications
There are a lot of Maxim Integrated ICL7660ISA+ Voltage Regulators applications.
- Driver circuits
- Alternators
- Plate bending machines
- Electric heating, lighting
- Constant current circuits
- Computed tomography (CT)
- Grinders
- ATMs
- Network technology
- Digital precision reference circuits
