Parameters |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Channels |
2 |
Power Dissipation |
727mW |
Adjustable Threshold |
NO |
Reset |
Active High |
Voltage - Threshold |
Adjustable/Selectable |
Number of Voltages Monitored |
2 |
Reset Timeout |
<1ms Minimum |
Supply Current-Max (Isup) |
0.015mA |
Threshold Voltage |
+1.3V |
Length |
9.375mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1997 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
ICL7665 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T8 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
16V |
ICL7665ACPA Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. This power ic is packaged in a way that looks like a Tube. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 2 channels. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 240. Manage ics operate at 5V supply voltages. When a supply voltage of 2 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. A total of 8 pins are located on this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is always advisable to use ICL7665, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 5V power to power this power management.
ICL7665ACPA Features
Multi-Voltage Supervisor type
ICL7665ACPA Applications
There are a lot of Maxim Integrated ICL7665ACPA Voltage Supervisors applications.
- Efficient information transmission
- Important electronics for automotive protection
- Solar power charger
- Power distribution systems of CCU
- External alarm
- Detection of phase loss
- DC stabilized power supply module
- Cloud computing
- Medical-specific isolation transformer
- Smartphones