ICL7665ACSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Voltage - Rated DC | 18V |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7665 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Output Voltage | 18V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 3μA |
| Power Dissipation | 471mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | <1ms Minimum |
| Min Reset Threshold Voltage | 1.225V |
| Max Reset Threshold Voltage | 1.375V |
| Threshold Voltage | +1.3V |
| Undervoltage Threshold | 1.225V |
| Overvoltage Threshold | 1.375V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7665ACSA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. Power management is possible to find a series of 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. When a supply voltage of 2 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. 8 pins are present in total in this power management. There are 8 pins on the power managment ic. It is recommended that Vsup should not be less than 2V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 16V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 15μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by ICL7665. The power management must be powered by 5V volts to function properly. The maximum supply temperature is 15μA.
ICL7665ACSA+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
ICL7665ACSA+ Applications
There are a lot of Maxim Integrated ICL7665ACSA+ Voltage Supervisors applications.
- Unattended substation automation
- Power distribution systems of operating room
- Transformer load monitoring equipment
- Radar
- Power distribution systems of ICU
- Detection of phase sequence
- Battery cars
- DSP
- Battery cars
- DC stabilized power supply module
