ICL7665ACSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICL7665 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 2.6μA |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 2 |
| Reset Timeout | <1ms Minimum |
| Undervoltage Threshold | 1.225V |
| Overvoltage Threshold | 1.375V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICL7665ACSA+T Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. Power management consists of 2 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 5V is applied to the power ic, it conducts. When 2 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. Pin count of the power management is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. There should be no more than 16V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a supply current of 15μA for the power management. You can always use ICL7665, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 5V volts of power. The maximum supply temperature voltage supervisor can handle is 15μA.
ICL7665ACSA+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2V
15μA operating supply current
ICL7665ACSA+T Applications
There are a lot of Maxim Integrated ICL7665ACSA+T Voltage Supervisors applications.
- Battery cars
- Radar
- Power distribution systems of ICU
- Precision measurement
- Medical-specific insulation monitor
- Medical-specific isolation transformer
- Automotive permanent magnet synchronous motors
- Microcontroller system
- Refrigeration
- Embedded computing
